Product name : CHINA FACTORY LQB HIGH TEMPERATURE RESISTANT ASPHALT GEAR PUMP . THERMAL INSULATION PUMP CHINA SUPPLIER,FACTORY AND MANUFACTURER
Product No. : 202242884452
Details:
Overview of LQB asphalt pump:
Asphalt heat preservation pump is divided into ordinary and stainless steel materials, both with heat preservation sleeve, suitable for solidification or crystallization at room temperature and easy to flow and lubricious liquid by heating and maintaining the temperature, And the occasions where heat preservation is required for outdoor installation and process in high and cold areas, heat transfer oil, steam, hot water, cold water and other media can be used to heat preservation, heating and cooling of the liquid and the pump. When the pump starts to work, it is preheated to reduce the starting power of the pump. . It is suitable for conveying corrosive or non-corrosive liquids with high hygienic conditions. The conveying medium does not contain solid particles, the temperature is not higher than 350 °C, and the viscosity is 5cSt--1500cSt. Liquids, such as various chemical raw materials, irrigation Packaging medicine, food, cosmetics, pesticides, detergents, printing and dyeing, brewing, resin, glue and other industries. There are two types of pump drive mode: motor direct connection and reducer. When the viscosity of the liquid exceeds 1500cSt, the reducer should be used for transmission. Performance parameters:
Asphalt heat preservation pump is divided into ordinary and stainless steel materials, both with heat preservation sleeve, suitable for solidification or crystallization at room temperature and easy to flow and lubricious liquid by heating and maintaining the temperature, And the occasions where heat preservation is required for outdoor installation and process in high and cold areas, heat transfer oil, steam, hot water, cold water and other media can be used to heat preservation, heating and cooling of the liquid and the pump. When the pump starts to work, it is preheated to reduce the starting power of the pump. . It is suitable for conveying corrosive or non-corrosive liquids with high hygienic conditions. The conveying medium does not contain solid particles, the temperature is not higher than 350 °C, and the viscosity is 5cSt--1500cSt. Liquids, such as various chemical raw materials, irrigation Packaging medicine, food, cosmetics, pesticides, detergents, printing and dyeing, brewing, resin, glue and other industries. There are two types of pump drive mode: motor direct connection and reducer. When the viscosity of the liquid exceeds 1500cSt, the reducer should be used for transmission. Performance parameters:
model | flow | Working pressure Mpa | Suction vacuum height m | Inlet and outlet diameter mm | Matching motor | |||
L/min | m3/h | Power kw | model | |||||
LQB-1/0.36 1/0.8 | 16.6 | 1 | 0.36 0.8 | 3 | φ25 | 1.5 1.5 | Y90L-4 Y90L-4 | |
LQB-2/0.36 2/0.8 | 33.3 | 2 | 0.36 0.8 | 3 | φ25 | 1.5 2.2 | Y90L-4 Y100L1-4 | |
LQB-3/0.36 3/0.8 | 50 | 3 | 0.36 0.8 | 3 | φ25 | 1.5 2.2 | Y100L-6 Y112M-6 | |
LQB-5/0.36 5/0.8 | 83.3 | 5 | 0.36 0.8 | 3 | φ40 | 2.2 4 | Y100L-4 Y112M-4 | |
LQB-6/0.36 6/0.8 | 100 | 6 | 0.36 0.8 | 3 | φ40 | 2.2 4 | Y100L-4 Y112M-4 | |
LQB-8/0.36 8/0.8 | 133 | 8 | 0.36 0.8 | 3 | φ50 | 4 5.5 | Y132M1-6 Y132M2-6 | |
LQB-10/0.36 | 167 | 10 | 0.6 | 3 | φ50 | 4 | Y132S1-6 | |
LQB-12/0.36 12/0.8 | 200 | 12 | 0.36 0.8 | 3 | φ55 | 4 5.5 | Y132M-6 Y132M2-6 | |
LQB-18/0.36 18/0.8 | 300 | 18 | 0.36 0.8 | 3 | φ55 | 5.5 7.5 | Y132S-4 Y132M-4 | |
LQB-18/0.36 18/0.8 | 300 | 18 | 0.36 0.8 | 3 | φ70 | 5.5 7.5 | Y132M2-6 Y160M-6 | |
LQB-25/0.36 | 416 | 25 | 0.6 | 3 | φ100 | 7.5 | Y160M-6 | |
LQB-29/0.36 29/0.8 | 483.3 | 29 | 0.36 0.8 | 3 | φ70 | 7.5 11 | Y132M-4 Y160M-4 | |
LQB-38/0.36 38/0.8 | 633 | 38 | 0.36 0.8 | 3 | φ100 | 11 15 | Y160L-6 Y180L-6 | |
LQB-58/0.36 58/0.8 | 960 | 58 | 0.36 0.8 | 3 | φ100 | 18.5 22 | Y180M-4 Y180L-4 |
Related Products: