Product Description
Specifications
Z4 Series Steel Rolling Mill Extruder DC motor
Z4 Series DC Motor are dominant products of our factory. The Industry DC motors products are found wide use for prime mover in various in various machinery, Sucha as Z4 Series DC Motor
Electric Motor
Steel mill DC motor in metallurgical industry, Metal cutting machine tool, Paper making, Print textile, Peinting and dyeing, Cement-making, Plastic extruding machine woodwork machine etc.
Z4 SERIES DC MOTOR
-----------------------------------------------------------------------------------------------------------------------------------------------
Working Conditions:
1, Alititude above sea level maximal 1000m
2, Cooling air temperature maximal 40'C
3, Ambient conditions for motors should be free from acidic, Alkali fumes or other aggressive gases which corrode insulation
4, Armature and field circuit for motors may be either operated on static thyristor controlled supplies. Or from DC generator
5, Performances of motors all comply with state standard GB755 fUNDAMENTAL TECHNICAL RULES FOR ELECTRSCAL MACHINES
Motor Frame: IEC Z4-100~Z4-450
-----------------------------------------------------------------------------------------------------------------------------------------------
Products performance:
Motor Frame: IEC Z4-100~Z4-450
Output(KW): 2.2kW~1400kW
Rated Voltage(V): The sandard rated voltage of this series motors are 160V or 440V, Values for 220V or 400V or other voltage may be derived on request
-----------------------------------------------------------------------------------------------------------------------------------------------
Excitation Type: Separate excitation is the basic excitation type of this series motors, Nominal field voltage: 180V, Other excitation voltage are also acceptable on request. To assure the reliablity of insulation of excitation system, The motor must be protected againse self-indued voltages by a release resistor connected in parallel with the field winding when the excitation circuit of the motor is interrupted, At rated field winding resistance(cold). While the field voltage is higher than nominal voltage, The value of shunt resistance may be lower than seven-times fields resistance. Otherwise higher than seven-times.
Raged Speed(rpm): 3000, 1000, 750, 600, 500, 400, 300, 200r/m. Total nine grades.
Insulation Class: CLASS F
Protection Class: IP23 and IP44 is adopted for the mtoors protections of this series
Mounting Type: IMB3, IM35
Duty: Continuous working system(S1) is applied
-----------------------------------------------------------------------------------------------------------------------------------------------
Methods of Cooling: IC06, IC17, IC37 and ICW37A86, Other types of protection and cooling required by customers can be negotiated.
Modes of cooling for all the Z4 DC motor are separate cooling, Force ventilated, Cooling by frame radially mounted, Spearately powered Ventilating fan, And attached with an air filter, Modes of cooling for motors may be made into three types, Namely IC06, IC17, IC37
A, Z4-100~Z4-160 the blower is mounted on the non-drive side
B, Z4-180~Z4-450 the blower is mounted on drive side
Z4 Series Steel Rolling Mill Extruder DC motor
Z4 Series DC Motor are dominant products of our factory. The Industry DC motors products are found wide use for prime mover in various in various machinery, Sucha as Z4 Series DC Motor
Electric Motor
Steel mill DC motor in metallurgical industry, Metal cutting machine tool, Paper making, Print textile, Peinting and dyeing, Cement-making, Plastic extruding machine woodwork machine etc.
Z4 SERIES DC MOTOR
-----------------------------------------------------------------------------------------------------------------------------------------------
Working Conditions:
1, Alititude above sea level maximal 1000m
2, Cooling air temperature maximal 40'C
3, Ambient conditions for motors should be free from acidic, Alkali fumes or other aggressive gases which corrode insulation
4, Armature and field circuit for motors may be either operated on static thyristor controlled supplies. Or from DC generator
5, Performances of motors all comply with state standard GB755 fUNDAMENTAL TECHNICAL RULES FOR ELECTRSCAL MACHINES
Motor Frame: IEC Z4-100~Z4-450
-----------------------------------------------------------------------------------------------------------------------------------------------
Products performance:
Motor Frame: IEC Z4-100~Z4-450
Output(KW): 2.2kW~1400kW
Rated Voltage(V): The sandard rated voltage of this series motors are 160V or 440V, Values for 220V or 400V or other voltage may be derived on request
-----------------------------------------------------------------------------------------------------------------------------------------------
Excitation Type: Separate excitation is the basic excitation type of this series motors, Nominal field voltage: 180V, Other excitation voltage are also acceptable on request. To assure the reliablity of insulation of excitation system, The motor must be protected againse self-indued voltages by a release resistor connected in parallel with the field winding when the excitation circuit of the motor is interrupted, At rated field winding resistance(cold). While the field voltage is higher than nominal voltage, The value of shunt resistance may be lower than seven-times fields resistance. Otherwise higher than seven-times.
Raged Speed(rpm): 3000, 1000, 750, 600, 500, 400, 300, 200r/m. Total nine grades.
Insulation Class: CLASS F
Protection Class: IP23 and IP44 is adopted for the mtoors protections of this series
Mounting Type: IMB3, IM35
Duty: Continuous working system(S1) is applied
-----------------------------------------------------------------------------------------------------------------------------------------------
Methods of Cooling: IC06, IC17, IC37 and ICW37A86, Other types of protection and cooling required by customers can be negotiated.
Modes of cooling for all the Z4 DC motor are separate cooling, Force ventilated, Cooling by frame radially mounted, Spearately powered Ventilating fan, And attached with an air filter, Modes of cooling for motors may be made into three types, Namely IC06, IC17, IC37
A, Z4-100~Z4-160 the blower is mounted on the non-drive side
B, Z4-180~Z4-450 the blower is mounted on drive side
Z4 Series DC Motor | ||
Protection Class | IP21S.IP23 and IP44 can be negotiated | |
Rated Speed | 3000,1500,1000,750,600,500,400,300,200r/min. total nine grades | |
Standard Rated Voltage | 160V/440V. 220V/400V/660V or other Voltage may be derived on request | |
Electric Motor Mounting Type | ||
IMB3 | Z4-100~Z4-450 | Horizontal foot mounted |
IM35 | Z4-100~Z4-350 | Horizontal flanged foot mounted |
IMV-1 | Z4-100~Z4-225 | Vertical flanged mounted |
IMV-51 | Z4-100~Z4-315 | Vertical flanged and foot mounted |
Duty: ContinuousS1 | ||
Methods of Cooling: IC06, IC17, IC37 and ICW37A86, Other types of protection and cooling required by customers can be negotiated. |
Manufacturing process and Complete internal supply chain :
We strictly check on every step of the production chain to ensure links is good in quality, to satisfy customers' demand and ensure delivery at the same time. advanced equipment and complete internal supply chain, from punching, laminating, welding, machining, winding, embedded line, dipping, assembled to test, all the procedures are done in-house to ensure quality.
Performance Condition |
Altitude above sea level maximal 1,000m; |
Cooling air temperature maximal 40 o C |
Ambient conditions for electric motors should be free from acidic, alkali fumes or other aggressive gases which corrode insulation. |
Duty: Continuous (SI); |
Monthly average temperature would not be more than 24 degree celsius.and r elative humidity: monthly average no more than 85%. Group of company "SEALOCEAN" is a modern enterprise specializing in producing all kinds of small and medium motors. Its products mainly include Y, Y2 and IE2 series three-phase asynchronous motors, MS aluminum shell motors, YD series multi-speed motors, YCT series electromagnetic variable-speed motors, YVP variable-frequency and variable-speed motors, YEJ electromagnetic braking three-phase asynchronous motors, Z4 Series DC Motor 1.5kW-1500kW 160V to 550V Metallurgy Metal Cutting MotorYC/YCL and YL single-phase series motors, JY single-phase asynchronous motors and MY/ML aluminum shell single-phase asynchronous motors.Since its inception, the company consistently adheres to the policy of "Develop Technology to Expand Market, Enhance Quality to Create Brand, Strictly Manage to Increase Benefit, and Based on Integrity to Be World-renowned", and insists on first-class quality to create first-class enterprise.
www.sealcocean-international.com [email protected] Skype: [email protected] |