Product name : CHINA FACTORY INDUSTRIAL CENTRIFUGAL CANTILEVER PUMPS IS SERIES WITH SINGLE-STAGE SUCTION (AXIAL SUCTION) FOR THE SUPPLY OF CLEAN WATER OR SIMILAR CLEAN WATER,SIMILAR CENTRIFUGAL CANTILEVER PUMPS OF TYPE K, IS125-40-100
Product No. : 2023101615532
Details:
IS serial water centrifugal pump is a single-stage single suction (axial suction) centrifugal pump for conveying solid particles, the temperature does not exceed 80 degrees of water or the physical and chemical properties similar to water and other liquids, the working pressure is less than 0.3MPa, suitable for industrial and mining enterprises and city water supply and drainage and agricultural irrigation.
The series IS clean water centrifugal pump has 29 basic types. IS clean water centrifugal pump with a wide range of pumps, "three" high level, reliable structure, easy maintenance, small vibration, low noise, high efficiency, is the national promotion of energy-saving products. From the transmission side, the pump clockwise rotation.
IS clean water centrifugal pump performance range:
Flow Q=6.3 ~ 400m3/h,
Lift H=5 ~ 125m,
Speed n=2900, 1450r/min,
Band power Pn=0.55 ~ 110kw,
Inlet diameter Dn1=50 ~ 200mm.
Model significance: example IS80-65-160A
IS- single-stage single suction cantilever centrifugal pump,
80- pump inlet diameter (mm),
65- pump outlet diameter (mm),
Nominal diameter (mm) of 160- type pump impeller,
A- pump impeller diameter through a good cut.
Introduction:
Sealocean IS serial centrifugal water pumps are single stage suction cantilever centrifugal pumps. They are used to deliver clean water and the liquids of which the physical and chemical properties are similar to clean water.
Application:
It is used for industry and city clean water supply and drainage, irrigation, fire protection, long distance water supply, metallurgy, chemical,textile, china processing, pigment, paper making, etc. ( temperature<80°C)
Feature:
They are featured by wide range of performance, high efficiency, superior standardzation, easy maintenance, etc.
Model Notation:
IS 65-40-200 A D
IS - Model Series
65 - Inlet Diameter (mm)
40 - Outlet Diameter (mm)
200 - Nominal Impeller Diameter (mm)
A - Sign of cut impeller
Note: The impeller form consists of such five kinds as O, A, B, C and Z, respectively standing for:
O- Impeller prototype
A- Impeller OD cut for the first time
B- Impeller OD cut for the second time
C- Impeller OD cut for the third time
Z- Increased impller OD
Related Products: