K series Spiral Bevel Gearbox/Gear Motor/ Speed Reducer
Rated Power | 0.18KW~200KW |
Rated Torque | Up to 50000N.m |
Gear Arrangement | Bevel Helical Hardened Gearbox |
Input Speed | 50HZ or 60HZ of 4Pole,6Pole and 8pole |
Ratio | 5.36~192.18 |
Installation Form | Flange Mounted, Foot Mounted or Torque Arm Mounted |
-Rigid cast iron box, the gear surface by high-frequency heat treatment, after precision machining, constitute
a helical gear, bevel gear.
-Gear is made of high quality alloy steel and hardened by carburizing , The hardness of gear surface is up to
60 ±2hrc, and the surface grinding accuracy is up to 5-6grade.
-The computer repair technology is used to prefix the gear, which greatly improves the carrying capacity of
the reducer.
-Standard reducers are divided according to the torque reduction, which is more in line with customer
requirements and avoids the waste of power.
-Variety of sealing structures are used to prevent oil leakage.
Application: food processing machine, construction machinery, wood processing machine, conveyors,
agriculture machinery, crane, mineral machinery.
Advantages:
1. All input/ output shafts are plated so that can prevent them to rusting.
2. The shaft mounts have labyrinth sealing on the conveyor end and input shaft end so that the oil seal is safe
from contamination.
3. High efficiency.
Our gearbox units now are in higher load capacity as the gears have been redesigned.
4. Strong capacity of being overloaded.
Our gearbox units now are in higher load capacity as the gears have been redesigned.
5. Long service life.
Life of main parts of gearbox (except wearing parts) should not be less than 20, 000 hours.
6. Anti-leaking oil.
The front end of the shaft mount has a hub cover to protect the front oil seal as well as moving part of the
gearbox.
7. Simple structure and convenient to be installed and maintained
8. Small volume
9. Widely application