Product name : CHINA FACTORY EXPLOSION-PROOF ELECTRIC MOTOR YBU, YBUS, YBUD, YBUS3,YBUS1,YBUS2-260-6,260 KW,1140 V, IP67, H,EXDI MB FOR TUNNELING HARVESTER WITH CUTTING MOTOR, TUNNEL CRAWLER HYDRAULIC ELECTRIC TUNNELING HARVESTER
Product No. : 2023630144331
Details:
1 overview
YBU, YBUS, YBUD series explosion-proof three-phase asynchronous motors for TBMs (hereinafter referred to as motors) are suitable for explosion-proof three-phase asynchronous motors for underground TBMs in coal mines, such as cutting motors, pumping station motors, shovel motors, two-transport motors, etc.It can be used safely in mines with an altitude of not more than 1000 meters, an ambient temperature of -20℃~+40℃ (air-cooled motor) or 0℃~+40℃ (water-cooled motor), a relative humidity of not more than 95% (at a temperature of 25℃), and a mixture of methane and explosive gases.
2 Model description
2.1 The representative meaning of the motor model
example
Y B U (S)--
Y B U D -/-/
3 Conditions of use
3.1 Environmental conditions for motor use
The motor should be able to operate at rated speed under the following conditions:
A) The altitude does not exceed 1000m
B) For air-cooled motors, the ambient air temperature is -20℃~+40C; for water-cooled motors, the ambient air temperature is 0C~+40℃.
C) The relative humidity of the air is not greater than 95%RH (at 25℃);
D) Underground coal mines with the risk of methane mixture and coal dust explosion
4 Technical features
4.1 Main performance
4.1.1 Explosion-proof type: mine explosion-proof type
4.1.2 Explosion-proof mark: ExdI Mb
According to the conditions of use of the working surface, the protection level can reach IP55-1P67.
5 Structural features
This motor is of mine explosion-proof type, the shell has a water-cooled structure, and the overall protection level is IP44.The motor is composed of a frame, a stator core with winding, a rotor, an end cap, a bearing and other parts.
5.1 Chassis structure
The chassis is welded with Q235-A steel plate.
5.2 Stator structure
The stator is in the form of external pressure installation.The process of scattered embedded windings, H-class insulation, and vacuum pressure dipping is adopted.
5.3 Rotor structure
The rotor is a cast aluminum rotor, which has good electrical properties that meet the working conditions of the coal mining face.
5.4 Shaft and end cap structure
The motor shaft is made of alloy steel, and the shaft extension is flat key.The front end cover is HT250 cast structure.
5.5 Bearing and sealing structure
The motor meter uses a two-bearing structure, the shaft extension end is 6314, and the inner and outer sides of the bearing are provided with sealing structures, of which the outer side is the skeleton oil seal; the outlet end is a 6314 bearing, and the inner cover sealing structure is a felt oil seal.
5.6 Junction box structure
The junction box is installed on the rear end cover and has 6 terminal blocks, which can perform star angle conversion of 660/380V voltage.
6 Ordering instructions
6.1 When ordering, the model, power, voltage, quantity, arrival station name, unit, and contact person must be specified in detail.If you need to order spare parts, you should submit them at the same time when ordering.
6.2 If the user uses and stores the motor correctly in accordance with the provisions of the instruction manual, the manufacturer guarantees that the motor will operate well within one year of use and the factory date will not exceed two years.If the motor is damaged and does not work properly due to poor manufacturing quality during this period, the manufacturer promises to repair or replace the parts for the user free of charge, without assuming any other responsibilities.
Related Products: